1 of 4

Hunter 260 Trailing Mooring Cover

Trailing Mooring Cover (T-M)
Full deck cover to use for both trailing and mooring. Lies flat over the deck for trailing and can be drawn up for water runoff while mooring. Has 5/16" elastic shock cord in the hem to hold 6" under the rub-rail, tie-down points, heavy duty nylon zipper, mast collar with drawcord closure, and flaps that snap around stays. Reinforcements are at back corners, fairlead areas, cleat areas, and splashrails. Does not fit over the boom when boom is in crutch with mast up. Store boom in cockpit. To use cover over the mast for trailing requires that the mast be no higher than 10" to 12" above the deck where the mast steps and no higher than 3" above the transom.

Available Options : Fabric | Color | Vents | Skirt | Cord Type | Monogram

NOTE: If you have stanchions on your boat, we need to modify the cover to fit your measurements. Stanchion modifications are $12.00 each. However, we do not charge for the 2 stanchions near the two sidestays or for the bow pulpit uprights. Please download the following measurement sketch, fill out, and either fax or email back to us. Currently we do not have a Hunter 260 Stanchion form... so use our Catalina 22 Stanchion Measurement Form PDF

Price: $1,457.00