Mariner Trailing/Mooring Cover

Trailing Mooring Cover (T-M)

Full deck cover to use for both trailing and mooring. Lies flat over the deck for trailing and can be drawn up for water runoff while mooring. Has 5/16" elastic shock cord in the hem to hold 6" under the rub-rail, tie-down points, heavy duty nylon zipper, mast collar with drawcord closure, and flaps that snap around stays. Reinforcements are at back corners, fairlead areas, cleat areas, and splashrails. Does not fit over the boom when boom is in crutch with mast up. Store boom in cockpit. To use cover over the mast for trailing requires that the mast be no higher than 5" above the deck where the mast steps and no higher than 3" above the transom.

NOTE: If you have stanchions, lifelines, or want cleat holes on your boat, we need to modify the cover to fit your measurements. Stanchion modifications are additional  and we have to modify the cover to fit around each one. Please download the following measurement sketch, fill out, and either fax or email back to us. Mariner Stanchion Measurement Form PDF  And / or if you need any cleats for mooring, they are an optional item and they too require the measurements form filled out.

Price: $612.00
If yes, you have a Motor... we need to know the distance from the deck edge down to the top of the motor mount. ____________ Then from center of boat to the first support __________ Then from first support to 2nd or width of motor mount _________ Height of motor mount _________ Include this in special instructions.
« Previous | Next »